WINDSPEED PORTABLE MAGNETIC DRILLING MACHINE WS6025MT
Includes:
MT-3 with annular cutter holder
1xHand Drift
1xPilot Pin 8
1xPilot Pin 8.0 x 91mm
1xPilot Pin 8.0 x 112mm
1xDouble Open End Wrench
1×2.5mm Hex Key Wrench
1×4.0mm Hex Key Wrench
1×6.0mm Hex Key Wrench
3xOperating Handle
1xLifting Handle
1xCarbon Brush
1xFixed Screw
1xOperation Manual
| Model | WS6025M | |
| Voltage (Single Phase) | 220 ~ 240V AC 50/60 hz | |
| Motor Rated Power Consumption | 1850W | |
| Motor Rated Ampere | 7.5 A | |
| No-load Speed (2 speeds) | High Speed 750 rpm/ Low Speed 450 rpm | |
| Hole Capacity | 60mm (13-60mm cutter , up to 75mm thick) | |
| Total Adaptor Inner Diameter | 19.05 mm | |
| Adjustable in height for max. stroke | 135 mm | |
| Coolant Supply | via Tool Holder | |
| Magnet Power Consumption | 85W | |
| Magnet Adhesion | 22540 N/ 2300 kgf | |
| Magnet Dimensions | 210 x 100 x 64mm | |
| Weight | 23kg | |
| Hole-Cutting Capacity | ||
| MT3 (Morse Taper) with annular cutter holder | Out Diameter: 18-60mm | Plate Thickness 6-50mm |
| MT3 (Morse Taper) with drill chuck holder | Jacobs Taper: JT6 | Drill Chuck Max. Diameter 16mm |
| Twist Drill | Max. Dia. 25mm | |
| Noss Straight Shank Twist Drill | Shank 1/2″, Max. Outer Diameter 16mm | |
Reviews
There are no reviews yet.