HKD Push-in anchor
Versatile and reliable internally threaded anchor
Applications:
Base material: Concrete in the compression zone, hard natural stone
Fastening medium loads with bolts or threaded rods
Optimum solution for serial fastenings in suspended ceilings, pipe suspensions, machine fixing etc.
Ideal for setting in the undersides of cavity ceilings
Flared end: For accurate setting flush with the surface, independent of hole depth
Full expansion: Cone design permits the full expansion of the anchor in both low-strength and high-strength material. No thread damage when hammering the anchor into the hole. Easy setting.
Visual verification: Visual verification of full expansion. The setting tool leaves a mark on the flared end that indicates proper expansion. Increased security.
Manual setting tool: With ergonomic hand guard for better grip, size gauge for quick check that the right tool is used and polygonal top that protects from injuries
| Base materials | Concrete (cracked), Concrete (non-cracked) |
| Environmental conditions | Inside dry |
| Material composition | Carbon steel, threaded rod: steel strength 8.8 |
| Material coating/plating/finish | Galvanized min. 5µm |
| Drill bit diameter | 8 mm |
| Hole depth | 27 mm |
Reviews
There are no reviews yet.