Fluke Digital Multimeter 17B+
600 V Cat II safety rating
50% bigger display with bright white backlight
Over-voltage indicator
Frequency and temperature measurement
Voltage, resistance, continuity, capacitance
Input terminal for ac and dc current measurements to 10 A current
Diode test, data hold
| AC volts | 4.000 V | 0.001 V | 1.0 % + 3 |
| (40 Hz to 500Hz)1 | 40.00 V | 0.01 V | |
| 400.0 V | 0.1 V | ||
| 1000 V | 1 V | ||
| DC volts | 4.000 V | 0.001 V | 0.5 % + 3 |
| 40.00 V | 0.01 V | ||
| 400.0 V | 0.1 V | ||
| 1000 V | 1 V | ||
| AC millivolts | 400.0 mV | 0.1 mV | 3.0 % + 3 |
| DC millivolts | 400.0 mV | 0.1 mV | 1.0 % + 10 |
| Diode test2 | 2.000 V | 0.001 V | 10% |
| Resistance | 400.0 Ω | 0.1 Ω | 0.5 % + 3 |
| (Ohms) | 4.000 kΩ | 0.001 kΩ | 0.5 % + 2 |
| 40.00 kΩ | 0.01 kΩ | 0.5 % + 2 | |
| 400.0 kΩ | 0.1 kΩ | 0.5 % + 2 | |
| 4.000 MΩ | 0.001 MΩ | 0.5 % + 2 | |
| 40.00 MΩ | 0.01 MΩ | 1.5% + 3 | |
| Capacitance3 | 40.00 nF | 0.01 nF | 2 % + 5 |
| 400.0 nF | 0.1 nF | 2 % + 5 | |
| 4.000 μF | 0.001 μF | 5 % + 5 | |
| 40.00 μF | 0.01 μF | 5 % + 5 | |
| 400.0 μF | 0.1 μF | 5 % + 5 | |
| 1000 μF | 1 μF | 5 % + 5 | |
| Frequency1 | 50.00 Hz | 0.01 Hz | 0.1 % + 3 |
| Hz | 500.0 Hz | 0.1 Hz | |
| (10 Hz – 100 kHz) | 5.000 kHz | 0.001 kHz | |
| 50.00 kHz | 0.01 kHz | ||
| 100.0 kHz | 0.1 kHz | ||
| Duty Cycle1 | 1 % to 99 % | 0.10% | 1 % typical 4 |
| AC current μA | 400.0 μA | 0.1 μA | 1.5 % + 3 |
| (40 Hz to 400 Hz) | 4000 μA | 1 μA | |
| AC current mA | 40.00 mA | 0.01 mA | 1.5 % + 3 |
| (40 Hz to 400 Hz) | 400.0 mA | 0.1 mA | |
| AC current A | 4.000 A | 0.001 A | 1.5 % + 3 |
| (40 Hz to 400 Hz) | 10.00 A | 0.01 A | |
| DC current μA | 400.0 μA | 0.1 μA | 1.5 % + 3 |
| 4000 μA | 1 μA | ||
| DC current mA | 40.00 mA | 0.01 mA | 1.5 % + 3 |
| 400.0 mA | 0.1 mA | ||
| DC current A | 4.000 A | 0.001 A | 1.5 % + 3 |
| 10.00 A | 0.01 A | ||
| Temperature | 50 °C- 400 °C | 0.1C | 2 % ± 1 °C |
| 0 °C- 50 °C | ± 2 °C | ||
| -55 °C- 0 °C | 9 % ± 2 °C | ||
| Backlight | – | – | Yes |
| 1All ac, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified. | |||
| 2Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA. | |||
| 3Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 40 nF range). | |||
| 4Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10 % and 90 %. | |||
Reviews
There are no reviews yet.